The DMRC in Paderborn fosters the education of engineers in the field of Design for Additive Manufacturing. We emphasize the critical role of designing parts specifically for AM for the successful implementation of the technology and are proud to actively contribute to transferring this essential knowledge to the industry.
Erneut fand das Solid Freeform Fabrication Symposiums in Austin, Texas, statt und unterstrich damit erneut seine Bedeutung als renommierte Konferenz für additive Fertigung in den Vereinigten Staaten. Das DMRC beteiligte sich mit insgesamt 8 Vorträgen zu den folgenden Themen:
Influence of Substrate Temperature on the Formation of Individual Weld Paths during Laser Cladding (LMD) when Processing 316L: Stefan Gnaase Assessing the Impact of the…
Once again, the Solid Freeform Fabrication Symposium was held in Austin, Texas, for its 34th edition, underscoring its importance as a renowned additive manufacturing conference in the United States. The DMRC contributed with all together 8 presentations on the following topics:
• Influence of Substrate Temperature on the Formation of Individual Weld Paths during Laser Cladding (LMD) when Processing 316L: Stefan Gnaase • Assessing the…
With 524 oral and poster presentations, the Solid Freeform Fabrication (SFF) Symposium 2022 is again one of the key events for the AM comunity in the states. The DMRC contributed with all together 6 presentations on the following topics:
This year, Dr Christian Lindemann and the IPM launched a new Science Symposium Session at the AM-FORUM BERLIN 2022. Under the heading "Research of Today for the Industrialization of Tomorrow", numerous topics were presented and discussed:
The DMRC is taking part in the 50 Mosaics lecture series as part of the UPB 50th anniversary events. This mosaic will show the impact of 3D printing on the lives of each and every one of us. Various (also interactive) stations will be set up on campus to convey this message.
At Hannovermesse 2022, we will show which key technologies are making important contributions to the transformation of mobility. The "New Mobility Paderborn" combines research on flexible, resource-saving and networked forms of transport for people and goods through digitization, modern mobility concepts, advanced manufacturing technologies and sustainable energy generation.
After many popular events had to be cancelled this year due to the pandemic, OWL3D took place for the first time as an in person and live event on September 29, 2021.
Additive Marking GmbH joins the DMRC in the consortium 2,5 years after its spin-off from the University of Paderborn. The start-up focuses on solutions for the digital process chain in additive manufacturing. It has developed a solution that automatically and individually integrates markings for each component already in the CAD data of the digital twin.
Am Mittwoch, 11. August, laden die Transferscouts der garage33 im Rahmen der Veranstaltungsreihe „Dr. Preneur“ zu einem digitalen Rundgang durch den Inkubator ein. Die Teilnehmenden erwarten spannende Vorträge rund um das Thema Ausgründung parallel zur Promotion sowie Einblicke in den Alltag und die Büros der Gründer.
Is there a start-up lurking in your PhD? With our new workshop Prototype your PhD you evaluate your own PhD for its market potential and go through the first steps of a start-up development. Register now!
Less then one month before the Additive Manufacturing Forum Digital Edition will start. The Direct Manufacturing Research Center (DMRC) wants to invite you to a talk about innovatiove products and materials on the way to industrialization at the Science Forum.
The start-up centre of the University of Paderborn "garage33" and the "Center for Entrepreneurship" (CFE) of the University of Applied Sciences Bielefeld (FH Bielefeld) together with the VerbundVolksbank OWL announce the annual idea competition "CALL FOR IDEAS".
